自动上胶机上胶是一种常见的现象，尤其是高粘度的胶水。一些产品由于过程的需求,必须使用胶水粘度较高,也因为胶水粘度高往往会出现画的现象,从而影响配料的质量和产品的审美程度,如何有效地解决自动配药机图纸问题已经成为用户关注。
Automatic glue machine glue is a common phenomenon, especially high viscosity glue. Due to the needs of the process, some products have to use glue with high viscosity. Because of the high viscosity of glue, the phenomenon of drawing often appears, which affects the quality of ingredients and the aesthetic level of products. How to effectively solve the drawing problem of automatic dispensing machine has become the concern of users.
如何有效解决出胶问题?如果您现有的自动点胶机出现点胶和绘图的现象，并对产品质量和美观要求的情况下，不妨从点胶阀即点胶阀来考虑这个问题。
How to effectively solve the problem of dispensing? If your existing automatic dispensing machine has the phenomenon of dispensing and drawing, and the product quality and aesthetic requirements, you might as well consider this problem from the dispensing valve, that is, the dispensing valve.
通常使用的配胶阀可以适应各种类型的胶水，但没有办法避免出胶问题;一般情况下，阀门带有z轴运动，这是影响胶水拉伸的因素之一。为了使点胶过程更加细致，不妨考虑更换点胶阀，使用z轴运动的注射阀，无需与产品表面接触点胶，喷涂点胶，可以避免出胶问题。
The commonly used glue valve can adapt to various types of glue, but there is no way to avoid the glue problem; in general, the valve with z-axis movement, which is one of the factors affecting the glue stretching. In order to make the dispensing process more detailed, we might as well consider replacing the dispensing valve, using the z-axis movement injection valve, without contact with the product surface dispensing, spraying dispensing, can avoid the glue problem.

济南双组份打胶机
Jinan two component gluing machine
如何有效解决出胶问题?Baiqing非接触式自动喷射阀和气动分配原则,高稳定性,适用于精确的分配和配药速度比点胶阀,喷射阀的高精度控制系统,分配剂量2问,频率280赫兹,100000年海洋保护区的粘度、高速高精度non-drawing塑料配制喷射阀。
How to effectively solve the glue problem? Baiqing non-contact automatic injection valve and pneumatic distribution principle, high stability, suitable for accurate distribution and dispensing speed ratio dispensing valve, high-precision control system of injection valve, distribution dose 2 questions, frequency 280 Hz, viscosity, high-speed and high-precision non drawing plastic preparation injection valve of 100000 year marine reserve.
解决出胶是注射阀的优点之一，精度高、速度快、无接触是注射阀的真正优点，这些都是传统的点胶阀无法实现的功能。
One of the advantages of injection valve is to solve the problem of dispensing. The real advantages of injection valve are high precision, high speed and non-contact. These are functions that traditional dispensing valve can not achieve.
.
.