1、双组份打胶机基料泵、固化剂泵及比例泵均采用特殊的高压柱赛泵，双向等量供料，基料泵由液压系统驱动，固化剂泵由气动马达驱动。
1, two component glue machine, the base pump, the curing agent pump and the proportional pump all use the special high pressure cylinder pump, the two way equal quantity feed, the base material pump is driven by the hydraulic system, and the curing agent pump is driven by the pneumatic motor.
二者辅以增压供料压盘，充分保证高黏度流体的满腔输送，基料压入并增高至高压，固化剂压入并增压，再送至比例泵，固化剂的流量由调比机构调节，二种组份同时送入混合器，充分混合后到达挤胶枪。
The two auxiliary booster feeding pressure plate, and fully guarantee the delivery filled with high viscosity fluid, the base material is pressed in and increased to high pressure, pressure and curing agent into the supercharger, sent to the proportional pump, curing agent flow by adjusting mechanism for adjusting the ratio of two components at the same time, into the mixer after mixing to glue gun.

2. 固化剂过滤器下端出口及混合器进料处均设有高压球阀，冲胶泄压用，混合器上设有单向针阀，不但使混胶更加均匀，而且防止两种组份互窜。
2., there are high-pressure ball valves at the lower end outlet and mixer inlet of the curing agent, which are used for pressure relief, and the one-way valve is used on the mixer. It not only makes the rubber mixing more uniform, but also prevents the two components from channeling.
3.双组份打胶机液压/气动型主要有基料泵、固化剂泵、比例泵、基料泵升降系统、调比结构、混胶结构、气动系统、液压系统及电气系统组成。
3., two component glue machine hydraulic / pneumatic type is mainly composed of basic material pump, curing agent pump, proportional pump, base material pump lifting system, adjusting ratio structure, mixing glue structure, pneumatic system, hydraulic system and electrical system.
4. 升降系统采用手动转阀控制，两种组份的比例调节，可通过调整滑块在摆动杆上的位置来改变。以上是双组份打胶机的基本操作原理
The 4. lifting system is controlled by manual valve, and the proportion of two components is adjusted. It can be changed by adjusting the position of the slider on the swing rod. The above is the basic operation principle of the double component glue machine

我们用满腔的热情、无限的激情对待工作和客户，我们愿意用勤奋的努力和您一起共铸美好明天！
We are filled with enthusiasm and passion towards work and customers, we are willing to use the hard work and you create a better tomorrow!