ab胶点胶机，又称双液胶点胶机。是专门用来点双组份胶水的设备，与普通点胶机设备相比较，同样由气压控加胶水由料筒压出，有阀门控制出胶大小。不同的就是有两套控制系统，分别控制a胶和b胶。
　　AB glue dispenser, also called double liquid glue dispenser. It is a device specially used for ordering two components of glue. Compared with the general dispensing equipment, it is also pressed by pneumatic control and glue from the cylinder, and the size of the valve is controlled by the valve. The difference is that there are two sets of control systems, which control a glue and B glue respectively.
　　AB胶点胶机的使用分别调动手动点胶阀尾部调动螺丝，顺时针向下转动为减小胶量，逆时针方向转动为加大胶量。
　　The use of AB glue machine manual dispensing valve respectively mobilize tail adjusting screw clockwise rotation, down to reduce the amount of glue, anti clockwise to increase the amount of glue.
　　通过调动压力桶调压阀来控制AB胶桶的压力，从而控制胶水的出胶速率，加大压力，出胶加速，反之，出胶减慢。通常为了到达AB胶出胶速率均衡，较黏稠流动性差的胶液必要较大压力，流动性强的胶液只需较小压力即可。

　　Through the mobilization of pressure tank pressure regulating valve to control the pressure barrel AB glue, so as to control the rate, increase the pressure of glue glue, glue on the other hand, acceleration, slow down. Usually in order to reach AB glue rate equilibrium, more viscous fluidity glue glue the necessary pressure, strong liquidity and a small pressure can.
　　在清理AB胶点胶机桶内的胶水换成清洗液(清水/天那水/酒精/丙酮)，高压力将清洗液从点胶阀打出，可扫除枪内残渣胶。
　　In the cleaning barrel AB glue machine glue into the cleaning liquid (water / ethanol / acetone / water that day), high pressure cleaning liquid from the dispensing valve type, can remove residue in the glue gun.
　　以上便是双组份打胶机今天的分享，您还满意吗，欢迎关注我们的网站:http://www.jncsjx.com并且关注我们的产品，我们将为您提供优良的产品，衷心的愿与您建立合作关系。
　　The above is a two component glue machine today's sharing. Are you satisfied? Welcome to our website: http://www.jncsjx.com and pay attention to our products. We will provide you with excellent products and sincerely cooperate with you.