济南胶机使用的胶主要是AB胶。AB胶通常有环氧树脂、硅树脂和聚氨酯。当胶水是黑色或深灰色时，内部将填充填料。与环氧树脂一样，聚氨酯通常是用A填充硅胶，如果硅胶的比例相同，则用胶水A和胶水B填充。
　　The rubber used in Jinan glue machine is mainly AB glue. AB gum usually has epoxy resin, silicone resin and polyurethane. When the glue is black or dark grey, the interior will be filled with fillers. Like epoxy resin, polyurethane is usually filled with silica gel A. If the proportion of silica gel is the same, it is filled with glue A and glue B.
　　填料的成分很多，有的硅粉、有的石英砂、有的石灰粉等填料具有导热散热的作用，从而提高了硬度。但是这些填充物很硬，它们会沉淀，这就是那层和胶水。如果涂上一层，胶水的性能会发生变化，密度会发生变化，导致比例的变化，导致胶水的性能无法使用，胶水背面的性能被固化，被冲洗出来的产品不合格。
　　There are many fillers, some silica powder, some quartz sand, some lime powder and other fillers have the function of heat conduction and heat dissipation, thus improving the hardness. But these fillers are very hard, and they deposit, that's the layer and glue. If coated with a layer, the performance of the glue will change, the density will change, leading to changes in proportion, resulting in the performance of the glue can not be used, the performance of the glue back is cured, the product washed out is not qualified.
　　济南胶机如何防止胶水沉降?
　　How does Jinan glue machine prevent glue settlement?
　　1. 在物料桶中加入搅拌功能。启动后，搅拌器将不断旋转搅拌器，防止搅拌器沉降。此外，搅拌棒更有效。如果棍子太短，够不到底部，胶水就会沉淀下来。
　　1. Stirring function is added to the material barrel. After starting, the agitator will continuously rotate the agitator to prevent the settling of the agitator. In addition, stirring rods are more effective. If the stick is too short to reach the bottom, the glue will settle down.

　　2. 浇注前，打开塑料桶，用搅拌棒或钻头搅拌，然后倒入桶内。
　　2. Before pouring, open the plastic bucket, stir it with a stirring rod or drill, and then pour it into the bucket.
　　3、可以买一些高品质的胶水，高品质的胶水，填充剂比较小，颗粒比较细，沉淀不那么严重。
　　3. Can buy some high-quality glue, high-quality glue, filler is relatively small, particles are relatively fine, precipitation is not so serious.
　　4. 购买接近生产日期的胶水。胶水停留的时间越长，沉积就越严重。
　　4. Purchase glue close to the production date. The longer the glue stays, the more serious the deposition will be.
　　5. 好每天都让上胶机运转。请不要长时间使用它。如果你很久没有使用它(例如，一周半)，从桶中取出胶水，用酒精冲洗。否则，胶水会沉淀在桶和管道里。
　　5. Better let the glue machine run every day. Please don't use it for long. If you haven't used it for a long time (for example, a week and a half), remove the glue from the bucket and rinse it with alcohol. Otherwise, glue will settle in barrels and pipes.
　　6. 为了防止沉淀，试管越短越好。这管子太长了，胶水容易沉积在里面。
　　6. In order to prevent precipitation, the shorter the test tube, the better. The pipe is too long and glue deposits easily in it.
　　以上内容由济南胶机小系列整理而成，本观点不代表本站观点。
　　The above content is organized by Jinan rubber machine small series, this point of view does not represent the point of view of this site.