涂布机胶水出胶断断续续应该怎样办

　　What should I do if the glue on the coating machine comes out intermittently

　　假如是打胶的时分呈现断断续续，这种状况肯定是要不得的，由于这个肯定会影响到正常的消费作业。涂布机胶水出胶断断续续缘由当然是很多的，我们要找准缘由，然后想出对策才行，而这个招致这种现象的缘由又比拟的复杂，假如不是经历比拟丰厚的工作人员的话，是很难剖析出一切的缘由，然后去处理问题的。今天就来为大家引见一下这种断断续续的状况终究是什么缘由招致的。

　　If the glue is applied intermittently, this situation is definitely unacceptable as it will definitely affect normal consumption operations. There are many reasons for the intermittent dispensing of glue on the coating machine, and we need to identify the reasons and come up with countermeasures. However, the reasons for this phenomenon are quite complex. Without experienced staff, it is difficult to analyze all the reasons and deal with the problem. Today, let me introduce to you the reasons behind this intermittent situation.

　　涂布机胶水出胶断断续续能够先思索一下是不是环境温度呈现了一些异常状况，这里所谓的断断续续我们也能够将其了解为是拉丝的这种现象，那这个有可能是出在胶水上面。我们在打胶的时分用到的胶水普通都是要在0℃到5℃之间停止保管，也就是放在冰柜里面停止保管，但假如是库房里面的工作人员在保管的时分没有保管得当，那就有可能会招致这个胶水的性状质量发作了改动，那在打胶的时分就是呈现拉丝或者呈现断断续续。

　　The intermittent dispensing of glue from the coating machine can be considered as an abnormal condition in the environmental temperature. Here, we can also understand that the intermittent dispensing is a phenomenon of wire drawing, which may be caused by the glue. The glue we use when gluing usually needs to be stored between 0 ℃ and 5 ℃, that is, stored in the freezer. However, if the warehouse staff do not properly store it during storage, it may cause changes in the quality of the glue's properties, resulting in a brushed or intermittent appearance during gluing.

　　在线式视觉涂布机.jpg

　　Online visual coating machine.jpg

　　这也间接的阐明这批胶水可能就是不合格的，那遇到这种状况就需求中止运用这批胶水，要换合格的胶水运用。接下来还有一种状况就是打胶的时分高度呈现了一些问题，假如是这个高度很高的话，那么间隔太远了就呈现断断续续的问题。就能够思索把这个高度恰当的调低一点。

　　This indirectly indicates that this batch of glue may be unqualified, and in such a situation, it is necessary to suspend the use of this batch of glue and replace it with qualified glue. The next situation is that there are some issues with the height when applying glue. If the height is too high, then the interval is too far, resulting in intermittent problems. We can consider lowering this height appropriately.

　　涂布机胶水出胶断断续续还有一种状况就是胶水需求停止搅拌，但假如这个搅拌的不合理，比方说在搅拌的时分搅拌的不平均，那么打胶的时分断断续续，这种状况就有可能会发作。所以要提示工作人员在上班之前就需求做好这些准备，比方说工作人员到库房里面去把胶水拿出来了之后，要提早把胶水放到设备里面，要提早将其搅拌好，搅拌平均了之后打胶就不容易呈现这个断断续续的问题了。接下来还有一种可能的状况就是压力设置呈现了一些问题。比方这个涂布机里面的压力设置太小了，或者是四周的环境温度太低了，而里面的压力又没有重新设置，那么一旦压力不够打胶的时分就不容易打出来就容易断断续续。

　　The glue dispensing of the coating machine is intermittent, and there is also a situation where the glue needs to be stopped from mixing. However, if the mixing is not reasonable, such as uneven mixing during mixing, then the glue dispensing may be intermittent, and this situation may occur. So it is necessary to remind the staff to make these preparations before going to work. For example, after the staff go to the warehouse to take out the glue, they should put the glue into the equipment in advance and mix it well. After mixing evenly, the intermittent problem of glue application is less likely to occur. Another possible scenario is that there are some issues with the pressure setting. For example, if the pressure setting inside the coating machine is too low, or the ambient temperature around is too low, and the pressure inside has not been reset, then once the pressure is not enough to apply glue, it is not easy to apply it intermittently.

　　本文由  立式丁基胶涂布机  友情奉献.更多有关的知识请点击  http://www.jncsjx.com/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from a vertical butyl rubber coating machine For more related knowledge, please click http://www.jncsjx.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.