丁基胶打胶机是出产中空玻璃的首要必要设备。这是一种半自动带材涂布机，通过手动抓住铝制距离框来操作。将铝制距离架放在传送带上，并手动抓住铝制距离架沿传送带运行。当铝制距离框通过传感器时，转印压力辊和胶水阀将依据设置程序自动运行，即气缸将起作用，压力辊将被压下。按下铝制距离架以跋涉。当铝制距离架抵达胶头时，涂上胶水。将胶水均匀地涂在铝制距离架上。当垫片框架的另一侧行将抵达压力辊时，压力辊将被抬起并向左移动。使用橡胶头时，橡胶阀将自动中止。
Butyl glue beater is the primary necessary equipment for producing insulating glass. This is a semi-automatic strip coater, which is operated by manually grasping the aluminum distance frame. Place the aluminum distance frame on the conveyor belt and manually grasp the aluminum distance frame to run along the conveyor belt. When the aluminum distance frame passes through the sensor, the transfer pressure roller and glue valve will operate automatically according to the setting program, that is, the cylinder will work and the pressure roller will be pressed down. Press the aluminum distance rack to trek. When the aluminum distance frame reaches the rubber head, apply glue. Apply the glue evenly to the aluminum distance frame. When the other side of the gasket frame is about to reach the pressure roll, the pressure roll will be lifted and moved to the left. When the rubber head is used, the rubber valve will stop automatically.
丁基胶打胶机常见问题的解决方案：
Solutions to common problems of butyl glue applicator:
1.铝框的一侧或两边没有胶水时，首要，应查看橡胶筒和橡胶头的温度是否正常，压力是否在我们设定的范围内。查看两个橡胶头之间的距离是否太大。
1. When there is no glue on one or both sides of the aluminum frame, first of all, check whether the temperature of the rubber cylinder and rubber head is normal and whether the pressure is within the range set by us. Check whether the distance between the two rubber heads is too large.

假如在上述情况下没有问题，则可以得出结论，丁基胶中的杂质堵塞了两个胶头(或一个)，而且胶头的眼睛被堵塞。这需求卸下胶头并用煤油浸泡。然后清洗胶头中的一切胶，然后重新安装。
If there is no problem in the above case, it can be concluded that the impurities in butyl rubber block two rubber heads (or one), and the eyes of the rubber head are blocked. This requires removing the rubber head and soaking it in kerosene. Then clean all the glue in the rubber head and reinstall it.
2.丁基橡胶涂布机该设备采用液压体系。油缸和液压体系均通过高压油管连接。每个连接均通过组合垫密封。假如发现漏油，请及时更换组合垫。
2. Butyl rubber coater the equipment adopts hydraulic system. The oil cylinder and hydraulic system are connected through high-pressure oil pipe. Each connection is sealed by a combination gasket. If oil leakage is found, please replace the combination pad in time.
3.设备的胶头加热和胶筒加热由两个加热棒和一个加热板提供，温度由温度控制仪设定和调节。假如温度升高不高或升高后下降，请查看加热棒或加热板是否损坏，并查看温控表是否正常。
3. The rubber head heating and rubber cylinder heating of the equipment are provided by two heating rods and one heating plate, and the temperature is set and adjusted by the temperature controller. If the temperature does not rise high or decreases after rising, please check whether the heating rod or heating plate is damaged and whether the temperature control meter is normal.
双组份打胶机为您提供了以上的精彩内容，更多的精彩内容请点击进入我们的网站：http://linshi.jncsjx.com我们后续会有更多的内容等您查看。
The two-component glue applicator provides you with the above wonderful contents. For more wonderful contents, please click to enter our website: http://linshi.jncsjx.com We will have more content for you to check later.