中空玻璃打胶机分为立式打胶机和卧式打胶机两种，双组份打胶机厂家着重通过配件的细节，讲解卧式中空玻璃打胶机购选购时我们应当注意的一些事项。
Hollow glass gluing machine is divided into vertical gluing machine and horizontal gluing machine. Two-component gluing machine manufacturer focuses on the details of accessories to explain some matters we should pay attention to when purchasing horizontal hollow glass gluing machine.
1、胶嘴
1. Rubber Nozzle
中空玻璃打胶机胶嘴
Glue nozzle of hollow glass gluer
胶嘴是与玻璃直接接触的零部件其硬度决定了胶嘴的使用年限，部分生产企业使用劣质的或者一般金属来知道胶嘴，这样的胶嘴长时间与玻璃接触会在胶嘴上留下很深的印记导致胶嘴报废。另外胶嘴部分如果涉及的不合理也会导致我们的玻璃边缘破碎、损坏等。
Rubber nozzles are parts directly in contact with glass whose hardness determines the service life of the rubber nozzles. Some manufacturers use inferior or ordinary metals to know the rubber nozzles. Such a long contact with glass will leave a deep impression on the rubber nozzles and lead to the scrap of the rubber nozzles. In addition, if the rubber nozzle part is not reasonable, it will also lead to the breakage and damage of the edge of our glass.
2、混交棒
2. Mixed rod
中空玻璃打胶机混胶棒
Mixing rod of hollow glass beater
我们都知道生产中空玻璃所使用的胶体是AB双组份胶，他是两种成分的胶按照比例进行混合使用的，所以我们的设备就需要有混交棒，他的主要功能就是两种胶体的混合。如果这个配件或者这个系统有问题会导致比如花胶、漏胶或者胶体性能下降等问题。
As we all know, the colloid used in the production of hollow glass is AB two-component glue, which is mixed with two-component glue in proportion, so our equipment needs a mixing rod. Its main function is the mixing of two colloids. If there is a problem with this accessory or system, it will lead to problems such as floral glue, leak glue or deterioration of colloid performance.

3胶体管路
3 colloidal pipeline
我们一定要询问好胶体管路的材质已经生产厂家，由于长时间跟胶体接触并且风吹日拆的很容易管路老化，设备的管路的日常维护也十分有必要。另外选购时一定要问清楚设备是否有自动清洗管路的功能，如果没有清洗管路的功能小编建议不要购买。这是因为AB胶的性能决定的，如果设备闲置几个小时就有可能导致管路杜塞无法正常工作。
We must ask the manufacturer about the material of the colloidal pipeline. Because of the long time contact with the colloidal pipeline and the easy aging of the pipeline, the daily maintenance of the pipeline of the equipment is also very necessary. In addition, when choosing and purchasing, we must ask whether the equipment has the function of automatic cleaning pipeline. If there is no function of cleaning pipeline, we recommend not to buy it. This is due to the performance of AB glue, if the equipment is idle for several hours, it may lead to the pipeline Dussel can not work properly.
4设备各种零部件线路的走位布局
4. Location layout of various parts and circuits of equipment
我们在选购中空玻璃打胶机一定打开设备看下设备的内部各种线路已经零部件的布局是否合理。一些小企业特别是山寨企业很有可能将各种电气线胡乱塞到设备里。另外如果布局不合理不单单给我们日后维修造成困难主要的还是会带来安全隐患。设备在工作时会产生大量的热，如果布局不合理就会导致这些热量无法排除造成元器件的损坏甚至火灾。
We must open the equipment when we buy the hollow glass gluing machine to see if the layout of the various internal lines and components of the equipment is reasonable. Some small enterprises, especially those in shanzhai, are likely to clutch various electrical wires into the equipment at random. In addition, if the layout is unreasonable, it will not only cause difficulties for our future maintenance, but also bring potential safety hazards. The equipment will produce a lot of heat when it works, if the layout is not reasonable, it will lead to these heat can not eliminate the damage of components or even fire.
率。
Rate.
感谢您的阅读与观看，本文的精彩内容来自：双组份打胶机，我们会有更多的精彩内容继续为您呈现，详情请点击：http://linshi.jncsjx.com
Thank you for your reading and watching. The wonderful content of this article comes from: two-component glue beater. We will have more wonderful content to continue to show you. For more details, please click: http://linshi.jncsjx.com.