
WJT02丁基胶涂布机
设备详情

技术参数

设备特点
卧式丁基胶涂布机是在铝间隔框两侧均匀涂抹热熔丁基胶的专用设备,操作人员需扶持间隔框.其它动作(压轮、打胶、停胶)均由设定程序自动完成.操作方便,运行平稳可靠。
采用不锈钢拉丝面板,台面整洁,外形美观。
可调速皮带传动电机,可适应不同操作人员快捷使用。胶缸内径D195mm ,长450mm,适用于各种规格的丁基胶。气液增压系统.压力均匀稳定。
丁基胶机装有光电开关.由PLC电脑程序控制,可实现铝条自动感应系统,只需人工持框与皮带同步完成。24小时定时开机,提高工作效率,节省预热时间。
胶头宽窄度可自动调整。
胶头宽窄度可自动调整。
Herizontal butyl nuber coating machine is the aluminum spacing frame on both sides evenly coated hot melt butyl rnuber,special equipment,ope ators need to support the partition framne , other actions (roller , glue , glue) were by setting up the program automatically , convenient
operation, stable and reliable operation .
Stainless steel wire drawing panel , clean and tidy , beautiful appearance.
Adjustable speed belt drive motor, can adapt to the use of different operators .
Rubber cylinder inner diameter 195mm, length 450mm, suitable for all kinds of butyl rubber .Advanced gas—liquid pressure system , uniform and stable pressure.
Ding Ji glue machine is equipped with a photoelectic switch , by the PLC camputer program control , can realize the automatic inductionsystem of aluminum strip, only the manual frame and belt synchronous completion.
24 hours to boot , improve work efficiency, save time .
上一篇:W.JT01丁基胶涂布机
下一篇:
相关新闻 more+
- 折弯先看回弹量 2026/11/16
- 封胶线先看转角 2026/11/14
- 灌分子筛的隐形时钟 2026/11/12
- 一条线跑顺,先别只盯“全自动”三个字 2026/11/09
- 涂得准却压不上,卡在工序接缝那几秒 2026/11/06
- 胶条断在第三边,锅不一定在机器 2026/11/04
- 0.5毫米的偏差,整窗质保直接归零 2026/11/02
- 别看参数表,先看今天车间里堆的是哪种框 2026/10/30
- 中空玻璃漏不漏气,第一道胶就定了生死 2026/10/28
- 中空玻璃起雾,八成是第一道胶没涂稳 2026/10/26

当前位置:



产品分类Product categories
联系我们Contact us
