为了能够确保丁基胶涂布机的正常运行，定期对设备进行常规的检测是一个需要进行的工作。在检测过程中可以及时的发现设备在技术，工作精度以及零部件运行时的隐患，对其进行针对性的修复措施，从而实现提升设备寿命和工作效率的效果。那么，在日常的设备检测中，人们常用的方式有哪些呢？
In order to ensure the normal operation of butyl adhesive coater, it is necessary to carry out regular inspection on the equipment. In the detection process, the hidden dangers of equipment in technology, working accuracy and parts operation can be found in time, and targeted repair measures can be taken to improve the service life and work efficiency of the equipment. So, what are the commonly used methods in daily equipment testing?
丁基胶涂布机如何进行检测
How to test butyl adhesive coater
一、初始露点以及紫外线照射
1、 Initial dew point and ultraviolet radiation
这是两种为基础的检测方式，在检测时需要专属的设备对丁基胶涂布机内的空气干燥性，影响视线的有机发挥物进行检查与测定。当在规定的条件中，露点小于或等于-40度，玻璃内没有雾状，油状或者其他污物时方为合格。
This is a two-way inspection method. During the inspection, special equipment is required to inspect and determine the air dryness in the butyl adhesive coater and the organic substances that affect the line of sight. It is qualified only when the dew point is less than or equal to -40 ℃ and there is no fog, oil or other dirt in the glass under the specified conditions.

二、密封检验
2、 Seal inspection
这种检验方式主要是应用在玻璃设备密封胶是否存在泄漏，且软硬程度是否达标的情况。在进行密封检查时，需要样品在10±0.5KPA条件下保持2.5H厚度的增长偏差小于15%。当超过这个数值时则记为不合格。
This inspection method is mainly used to check whether the sealant of glass equipment has leakage and whether the hardness and softness meet the standard. During the sealing inspection, it is required to keep the increase deviation of 2.5h thickness of the sample under the condition of 10 ± 0.5kpa less than 15%. If it exceeds this value, it will be recorded as unqualified.
三、气候循环的检验
3、 Verification of climatic cycle
在检验是需要丁基胶涂布机经历一年四季的模拟气候，期间需要加热，自然冷却以及强制制冷的操作，从而检测玻璃在不同气候下综合性能。
During the inspection, the butyl adhesive coater needs to experience the simulated climate all year round, during which heating, natural cooling and forced cooling are required, so as to test the comprehensive performance of the glass in different climates.
四、高温高湿实验
4、 High temperature and humidity test
这种检验方式的检验是对密封胶的粘结力，水汽透过率以及分子筛的吸附能力的检测，实验时需要空气湿度大于95%，温度在25-55度之间，它通过循环实验时中空玻璃内的气体被压缩和膨胀后的漏气情况来判断粘结力，水汽透过率是否达标。
The test of this test method is to test the adhesive force of sealant, water vapor transmission rate and the adsorption capacity of molecular sieve. During the test, the air humidity should be greater than 95% and the temperature should be between 25-55 degrees. It judges the adhesive force and whether the water vapor transmission rate meets the standard through the air leakage after the gas in the insulating glass is compressed and expanded during the cycle test.
丁基胶涂布机的检测方式大概就如此了，在日常使用中也要做好相关的检测工作，这样才能更好的确保设备的使用。
This is probably the way the butyl adhesive coating machine is tested. It is also necessary to do a good job in the daily use, so as to better ensure the use of the equipment.
本文的精彩内容由卧式丁基胶涂布机提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.jncsjx.com我们有专门的客服为您解答问题
The wonderful content of this article is provided by the knowledge of horizontal butyl adhesive coater. There are many wonderful content on this website. You can click to enter more content: http://www.jncsjx.com We have special customer service to answer your questions