（1）现场条件应具备380V交流电源，工业自来水源、排水沟。大部分的中空玻璃设备和门窗设备都是380V的，主要为了维持设备工作的稳定性。干净的自来水源，以及畅通的排水是清洗机良好工作的保障。

(1) The on-site conditions should have a 380V AC power supply, industrial water sources, and drainage ditches. Most insulated glass equipment and door and window equipment are 380V, mainly to maintain the stability of equipment operation. A clean water source and smooth drainage are the guarantees for the good operation of the cleaning machine.

（2）正确摆放进料段机架、清洗段机架、干燥段机架、出料段机架、控制柜和通风机箱。如果不按照顺序摆放，一会降低工作效率，二会产品质量不过关。

(2) Properly place the feed section rack, cleaning section rack, drying section rack, discharge section rack, control cabinet, and ventilation box. If not arranged in order, it will reduce work efficiency and result in poor product quality.

（3）调整支座调节整机水平度，允差1.5MM，纵向3MM（仅允许进料段比出料段高）。

(3) Adjust the support to adjust the levelness of the entire machine, with a tolerance of 1.5mm and a longitudinal deviation of 3mm (only allowing the feed section to be higher than the discharge section).

（4）整机纵向水平度符合要求后将四段机架连接紧固（机架上备有连接螺栓副）。

(4) After the longitudinal levelness of the entire machine meets the requirements, connect and tighten the four sections of the frame (there are connecting bolt pairs on the frame).

（5）在进料段机架与清洗段机架、清洗段机架与干燥段机架之间缝隙中涂上玻璃胶，以防止二处漏水。

(5) Apply glass glue to the gaps between the feed section frame and the cleaning section frame, as well as between the cleaning section frame and the drying section frame, to prevent water leakage at the two locations.

（6）按有关标准连接各传动系统。

(6) Connect each transmission system according to relevant standards.

（7）向水箱灌水前应将水箱清理干净。

(7) Before filling the water tank with water, it should be cleaned thoroughly.

（8）安装调整后按本说明书规定之操作顺序试车。

(8) After installation and adjustment, conduct a test run according to the operating sequence specified in this manual.

（9）清洗小规格玻璃片时请勿与传送辊[gǔn]平行放置。

(9) When cleaning the minimum specification glass sheet, do not place it parallel to the conveyor roller [g ǔ n].

本文由中空玻璃加工设备友情奉献.更多有关的知识请点击: http://www.jncsjx.com真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from the hollow glass processing equipment. For more related knowledge, please click: http://www.jncsjx.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned