The daily maintenance and upkeep strategy of insulating glass equipment is a matter that insulating glass processing plants should always pay attention to. Once any abnormalities are found in the insulating glass equipment, immediate maintenance should be carried out to ensure the safe operation of the insulating glass. To ensure the production efficiency of insulating glass, enterprises often encounter a series of problems during the production process of using insulating glass equipment. Due to the staff not knowing how to handle them, the faults are even worse. At this time, the manufacturer needs to provide training to the staff before starting the machine, so as to timely respond to the problems that occur in the production process of insulating glass equipment. In addition, some equipment operations may also involve staff changes and departures, and understanding and proficiency in the operation of the equipment are also important.

中空玻璃生产过程当中一定要注意细节，包括中空玻璃设备的使用维修及中空玻璃的材料选用都很关键。比如中空玻璃生产过程中，中空玻璃内部结雾。产生原因：由于二道密封剂质量不稳定或质量不过关，在阳光的照射下挥发到中空玻璃内部导致结雾；或者是干燥剂质量差，在太阳光照射下，释放低分子物，导致结雾。

During the production process of insulating glass, it is important to pay attention to details, including the use and maintenance of insulating glass equipment, as well as the selection of insulating glass materials. For example, during the production process of insulating glass, fog forms inside the insulating glass. Reason for occurrence: Due to the unstable or substandard quality of the second sealing agent, it evaporates into the interior of the insulating glass under sunlight, resulting in fogging; Or it may be due to poor quality of the desiccant, which releases low molecular weight substances under sunlight, leading to fogging.

丁基胶涂胶机是中空玻璃设备中的必须要用的设备，主要的功能是给铝框涂丁基胶的，也是使用比较频繁的设备。当遇到丁基胶涂布机挤出的丁基胶，出现毛刺不光滑时的方法。如果是新设备，应先观察出胶孔是否光滑，如果出胶孔粗糙，应先打磨，再试机器；旧机器，由于设备的温度传感器有时不灵敏，显示的温度与实际的不相符，这时就需要将温度进行上调，直到出胶正常为止。当遇到丁基胶不沾铝条和玻璃时，是由于温度的影响造成，建议将温度进行上调到合适为止。

The butyl adhesive coating machine is a necessary equipment in insulating glass equipment, and its main function is to apply butyl adhesive to aluminum frames, which is also a frequently used equipment. When encountering the butyl adhesive extruded by the butyl adhesive coating machine, there is a solution to the problem of uneven burrs. If it is a new equipment, it is necessary to first observe whether the adhesive hole is smooth. If the adhesive hole is rough, it should be polished first and then the machine should be tried again; In old machines, due to the temperature sensor being sometimes insensitive, the displayed temperature does not match the actual temperature. Therefore, it is necessary to increase the temperature until the glue is released normally. When encountering butyl adhesive not adhering to aluminum strips and glass, it is due to the influence of temperature. It is recommended to raise the temperature to a suitable level.