热熔胶机是熔化热熔胶的设备。当不工作时，热熔胶在主机冷却，热熔胶管和热熔胶枪留在里面。当厂家需要使用其他热熔胶时，不能直接在主机中添加另一台热熔胶机，需要将旧胶排干。下面巅峰自动化设备公司教你一种快速换胶的方法，这种方法适用于换类似的热熔胶。
Hot melt glue machine is the equipment for melting hot melt glue. When it is not working, the hot melt adhesive is cooled in the main engine, and the hot melt hose and hot melt adhesive gun remain in it. When the manufacturer needs to use other hot-melt adhesive, it is not allowed to directly add another hot-melt adhesive machine to the host, and the old adhesive needs to be drained. The following peak automation equipment company teaches you a quick glue change method, which is suitable for changing similar hot melt glue.
1.要消除机器内的热熔胶。将热熔胶机加热到工作温度，清除胶盒内的胶水。
1. First, remove the hot melt adhesive in the machine. Heat the hot melt glue machine to the working temperature and remove the glue in the glue box.
2.戴上防护手套，用无脱毛布擦拭胶盒内壁。不要使用锋利的工具。
2. Wear protective gloves and wipe the inner wall of the rubber box with a lint free cloth. Do not use sharp tools.

3.擦拭后，加入一些新的胶水，加热到新胶水的工作温度。
3. After wiping, add some new glue and heat it to the working temperature of the new glue.
4.待热熔胶机内的热熔胶熔化后，拆下热熔胶枪，将热熔胶管内剩余的胶水排出。这时，可以将热熔胶枪清洗干净。待热熔胶机和热熔胶管排出后，连接热熔胶枪。将1 / 3的新胶加入主机，加热熔化，并将剩余胶倒入热熔胶枪中排出。
4. After the hot melt adhesive in the hot melt adhesive machine melts, remove the hot melt adhesive gun and discharge the remaining glue in the hot melt hose. At this time, the hot melt glue gun can be cleaned. After the hot melt adhesive machine and the hot melt hose are discharged, connect the hot melt adhesive gun. Add 1 / 3 of the new glue to the main engine, heat and melt, and pour the remaining glue into the hot-melt glue gun to discharge.
5.别忘了清洁过滤器。这条路比较快。更换前一定要询问机器厂家，听从他们的指导，随意更换胶水。这不是我们自己和设备的责任。
5. Don't forget to clean the filter. This road is faster. Before replacement, be sure to ask the machine manufacturer, follow their guidance and replace the glue at will. This is not the responsibility of ourselves and the equipment.