中空玻璃双份打胶机出现打胶不饱满这个问题主要是有以下两种情况导致的！

Insulating glass double tape sealer appears not full of glue this problem is mainly due to the following two cases!
一、打胶速度过快

1. Glue too fast
有些客户为自己的生产节奏追赶生产进度，把打胶速度认为调整得太快，导致胶体还没有完全达到合格标准机头已经移到了下一步。

Some customers for their own production rhythm to catch up with the production schedule, the glue speed is considered too fast, resulting in Gel has not yet fully up to the standard head has moved to the next step.
做打胶作业的位置，如果需要快速打胶的速度调节打胶机的移动参数，那么相应的胶料系统也要相应的设置，比如此一来，我们需要增加给胶压力，双组份打胶机的出胶速度与物体移动的速度相配合。假如我们只是单独提高打胶机的移动速度如果没有对压力进行适当的调节，就很容易出现打胶不饱满的情况。

For the location of the gluing operation, if the speed of quick gluing is needed to adjust the movement parameters of the gluing machine, then the corresponding gluing system should also be set accordingly. For example, in this way, we need to increase the pressure on the gluing machine, the gluing speed of the gluing machine is matched with the speed of the moving object. If we only increase the movement speed of the sealer alone if there is no proper adjustment to the pressure, it is easy to appear the situation of insufficient gluing.

二、供胶压力不足
Insufficient pressure of glue supply
即使没有对打胶机的移动速度进行调整也会出现打胶不饱满的情况，那么也有可能是供胶压力太小所致。此时只需调整供胶有压力就能解决问题了。

Even if there is no change in the movement speed of the glue machine will appear to be not full of glue, then it may be too little pressure caused by glue. At this point only need to adjust the glue supply pressure can solve the problem.
三、头部传感器损坏

Head sensor damage
虽然很少出现这种情况，但也不排除出现这种情况。打胶机头有检测铝条深度的传感器，如发现铝条过深或过浅时他会自动调节输送的移动速度和供胶压力(自动调节幅度在小范围内)。

While this rarely happens, it can not be ruled out. The head of the sealing machine has a sensor to detect the depth of the aluminum strip. If the aluminum strip is too deep or too shallow, it will automatically adjust the moving speed of the conveying and the pressure of the glue supply (within a small range of automatic adjustment) .
上述是昌盛双组份打胶机为大家介绍的内容，感谢您在百忙中查看我公司的内容，如果您想了解更多，欢迎来电咨询！

The above is prosperous two-component glue machine for you to introduce the content, thank you for checking my company’s content in the busy schedule, if you want to know more, welcome to inquire!