落地式双液灌胶机自动胶水加热功能自动加热功能在灌胶行业中也是比较常见的，因胶水需求，例如：热熔胶、红胶、树脂胶和硅胶等，胶水特殊性的要求，所以只能根据其要求配置相应的灌胶设备和恒温装置，从而满足到行业的生产需求。
The automatic glue heating function of the floor type double liquid glue filling machine is also common in the glue filling industry. Firstly, due to the special requirements of glue, such as hot melt glue, red glue, resin glue and silica gel, the corresponding glue filling equipment and constant temperature device can only be configured according to their requirements, so as to meet the production needs of the industry.
在硅晶片灌胶中灌胶，一般会使用到加热的胶水，而在配置的自动灌胶机，必须带有这个功能，才能够符合点胶功能要求。胶水经过加热，可把性能发挥到极致，经过灌胶的效果也会特别的好，不至于会出现无法凝固或者粘接不稳定的问题，满足胶水特点要求，是灌胶设备基础配置。
In silicon wafer glue filling, heated glue is usually used, and the configured automatic glue filling machine must have this function to meet the requirements of glue dispensing function. After heating, the glue can give full play to its performance, and the effect of glue filling will be particularly good, so that there will be no problems of non solidification or unstable bonding. It meets the characteristic requirements of glue and is the basic configuration of glue filling equipment.
恒温装置在落地式双液灌胶机在上安装，可以在压力桶和点胶阀上进行加热，让胶水保持在一个恒定温度上，保持活跃的性质，可让涂胶有更好的效果，加热不是破坏，而且为了更好的进行涂胶，硅晶片灌胶整个面上涂胶，要保证涂胶的面的整洁性，才能够灌胶出一个较好的胶水面，贴片也是非常的简单。
The thermostatic device is installed on the floor type double liquid glue filling machine. It can be heated on the pressure bucket and dispensing valve to keep the glue at a constant temperature and keep its active nature, which can make the glue coating have better effect. Heating is not destructive. In order to better glue coating, the whole surface of silicon wafer glue filling shall be coated to ensure the cleanliness of the gluing surface, In order to fill the glue to a better glue surface, the patch is also very simple.
虽然贴纸灌胶与硅晶片灌胶两者都可以使用落地式双液灌胶机进行灌胶，只是在某些工艺有些的差别，比如恒温装置，在贴纸灌胶是不需要使用到自动加热功能，恒温装置效果就没有任何的作用了，这就是实际的操作作用，可根据到现实的产品需求，能为您找到合适的生产方式，方便厂家的生产。
Although the floor type double liquid glue filling machine can be used for both sticker glue filling and silicon wafer glue filling, there are some differences in some processes, such as constant temperature device. The automatic heating function is not required for sticker glue filling, and the effect of constant temperature device has no effect. This is the actual operation function, which can be based on the actual product demand, We can find a suitable production mode for you to facilitate the production of manufacturers.
本文的内容是由双组份打胶机给您提供，我们专注客户需求，不断的发展，为客户提供更多的服务，详情可参考我们的网站http://www.jncsjx.com
The content of this article is provided to you by the two-component gluing machine. We focus on customer needs, continuous development and provide customers with more services. For details, please refer to our website http://www.jncsjx.com