双组份打胶机在使用过程中也会呈现一些非常简略的问题，比方报警是怎么回事?往往很简略是事情，让不明白的您措手不及，下面我们给大家讲一下呈现的原因以及处理办法，让您万一呈现问题的时分能以及的检修，开始工作。
In the process of using the two-component gluing machine, there will be some very simple problems, such as what's the matter with the alarm? It's often a very simple thing, which makes you unprepared if you don't understand. Let's talk about the reasons and solutions, so that you can start to work in case of the problem.
一：就应该是管路堵了，胶压力超高报警，看看胶压力有没有超高，超高的话清洗管路。
1： It should be that the pipeline is blocked. If the glue pressure is too high, give an alarm. Check if the glue pressure is too high. If it is too high, clean the pipeline.
二：双组份打胶机看看是不是伺服电机报警，看看配电柜里的伺服控制器有没有报警的。
2： Two component glue machine to see if the servo motor alarm, to see if the servo controller in the power distribution cabinet alarm.

双组份打胶机故障剖析：
Failure analysis of two-component glue machine:
1、机头前进定位螺栓松动。处理方法：调理好并固定好
1. The head forward positioning bolt is loose. Treatment: conditioning and fixed
2 、玻璃定位松动，使其失去作用。处理方法：调定好定位。
2. The positioning of the glass is loose, making it useless. Treatment method: set the positioning.
3、 活动量太大或吸盘的真空发生器损坏。处理方法：维修。
3. The amount of activity is too large or the vacuum generator of the suction cup is damaged. Treatment: maintenance.
4前移气缸的前进力量太大。处理方法：调理前进速度。
The forward force of the forward moving cylinder is too large. Treatment: conditioning forward speed.
假如您是购买的我们的产品，能够联络我们的业务人员或许售后，我们给您提供电话处理和上门服务，让您一次购买设备，终身无忧。
If you are buying our products, you can contact our sales personnel or after-sales service. We provide you with telephone processing and door-to-door service, so that you can purchase the equipment once and have no worries for life.