中空玻璃打胶总翻车？双组份打胶机效果惊艳到离谱！

　　Does insulating glass always overturn when glued? The effect of the two-component glue machine is stunning and outrageous!

　　咱玻璃厂做中空玻璃，打胶环节真是“一言难尽”！以前靠人工打胶，纯属凭运气——胶线歪歪扭扭像蛇爬，气泡、断点随处可见，看着就闹心；更糟的是后期返工，客户反馈漏风漏水，拆下来一看，不是胶没涂匀就是断胶了，又费料又费工，工人累得够呛还没产值。直到用上双组份打胶机，才知道打胶能这么省心，配着中空玻璃生产线用，效率和品质直接拉满，效果惊艳到离谱！

　　Our glass factory produces insulated glass, and the gluing process is really difficult to describe! In the past, manual gluing was purely based on luck - the glue line was crooked and twisted like a snake crawling, and bubbles and breakpoints could be seen everywhere, making it annoying to look at; Even worse, during the later stage of rework, customers reported air and water leaks. Upon dismantling, it was found that either the glue was not evenly applied or had broken, which was both material and labor intensive. The workers were exhausted and had no output value. It wasn't until I used a two-component gluing machine that I realized how easy it was to glue. When paired with an insulated glass production line, the efficiency and quality were directly maximized, and the effect was stunning beyond imagination!

　　先说说最让人佩服的胶线均匀度，简直是“零误差”级别。不管是常规尺寸玻璃的直边，还是异形玻璃的不规则边缘，胶枪都能稳定出胶，涂出来的胶线粗细一致，像用尺子量过一样标准，完全没有人工打胶那种忽厚忽薄的情况。更难得的是，胶线里没有一点气泡、没有一处断点，紧紧贴在玻璃密封边上，密封性能直接达标，后期根本不用再补胶修胶，客户验收一次就能过。

　　First, let's talk about the most impressive uniformity of the glue line, which is truly at the "zero error" level. Whether it is the straight edges of regular sized glass or the irregular edges of irregular shaped glass, the glue gun can stably produce glue, and the thickness of the glue line applied is consistent, as if measured with a ruler, without the sudden thickness and thinness of manual glue. What's even more rare is that there are no bubbles or breakpoints in the glue line, which is tightly attached to the glass sealing edge, and the sealing performance meets the standard directly. There is no need to repair the glue in the later stage, and the customer can pass the inspection once.

　　定位精准度也绝了，完全不溢胶、不漏胶。设备自带数控定位系统，就像长了“火眼金睛”，能精准识别玻璃的密封边位置，胶枪沿着边缘匀速打胶，胶线刚好卡在该在的地方——不往玻璃表面溢胶，不用后期额外擦胶；也不往铝条里漏胶，既省了丁基胶、密封胶这些耗材，成品玻璃还干净美观，看着就专业。以前人工打胶，溢胶是常事，刮掉的都是钱，长期下来浪费不少，现在有了这台设备，耗材成本都降了一截。

　　The positioning accuracy is also unparalleled, with no glue overflow or leakage at all. The device comes with a built-in CNC positioning system, which is like having a "golden eye" that can accurately identify the position of the sealing edge of the glass. The glue gun applies glue at a constant speed along the edge, and the glue line is stuck exactly where it should be - without overflowing glue onto the surface of the glass and without the need for additional wiping later on; It also does not leak glue into the aluminum strip, saving consumables such as butyl rubber and sealant. The finished glass is clean and beautiful, and looks professional. In the past, manual gluing and glue overflow were common occurrences, and all that was scraped off was money, which wasted a lot in the long run. Now with this equipment, the cost of consumables has been reduced significantly.

　　最让人惊喜的是拐角打胶，顺滑到难以置信。做中空玻璃难免遇到直角、圆角，以前人工打胶，拐角处要么胶堆积成疙瘩，要么断档留缝隙，密封效果大打折扣。双组份打胶机遇到拐角时，会自动调整打胶速度和角度，胶线转弯处衔接得严丝合缝，没有一点堆积，也没有一丝断档，比有十几年经验的老工人手工打胶还精致，完全不影响玻璃的整体密封性能。

　　The most surprising thing is the corner gluing, which is incredibly smooth. When making insulated glass, it is inevitable to encounter right angles and rounded corners. In the past, manual glue was applied, and the corners either accumulated into lumps or left gaps, greatly reducing the sealing effect. When the two-component gluing machine encounters a corner, it will automatically adjust the gluing speed and angle. The glue line is seamlessly connected at the turning point, without any accumulation or interruption. It is more exquisite than manual gluing by experienced workers with more than ten years of experience, and does not affect the overall sealing performance of the glass.

　　而且它能跟中空玻璃生产线无缝衔接，批量生产效果稳如定海神针。玻璃从合片环节送过来，直接进入打胶工序，不用工人中途搬运、等待，设备自动抓取、自动定位、自动打胶，打完胶直接送往下一环节，整条生产线效率翻倍。更重要的是，每一块玻璃的打胶效果都一模一样，不会出现“这块好那块差”的情况，就算是一天几千块的批量订单，也能保证品质统一，返工率近乎零。

　　And it can seamlessly connect with the insulated glass production line, and the mass production effect is as stable as a sea needle. The glass is sent from the lamination process and directly enters the gluing process, without the need for workers to handle or wait halfway. The equipment automatically grasps, locates, and glues, and after gluing, it is directly sent to the next process, doubling the efficiency of the entire production line. More importantly, the gluing effect of each piece of glass is the same, and there will be no "one piece is good and the other piece is bad". Even if the batch order is thousands of pieces a day, the quality can be guaranteed to be uniform, and the rework rate is almost zero.

　　以前3个人一天累死累活打200块玻璃还总出错，现在1台双组份打胶机就能顶3个人，不仅效率高，效果还比人工好10倍。操作也简单，工人只要在面板上设置好参数，一键启动就行，不用专门养技术工，省了不少人工成本。对于玻璃厂来说，这可不是小好处，既提升了产能，又稳住了品质，还降低了成本，简直是打胶环节的“神器”。

　　Previously, three people worked tirelessly to make 200 pieces of glass in a day and always made mistakes. Now, one two-component gluing machine can support three people, which is not only efficient but also 10 times better than manual labor. The operation is also simple. Workers only need to set the parameters on the panel and start with one click, without the need for specialized technicians, saving a lot of labor costs. For glass factories, this is not a small benefit, as it not only increases production capacity, stabilizes quality, but also reduces costs. It is simply a "miracle tool" in the gluing process.

　　现在玻璃行业竞争这么卷，客户对品质的要求越来越高，打胶这种关键环节可不能再翻车了。双组份打胶机用实实在在的效果证明，打胶不用靠运气，靠设备就能稳赢。不管你是做常规中空玻璃，还是异形、大尺寸的高端订单，它都能轻松hold住，让每一块玻璃的密封都无懈可击。

　　The competition in the glass industry is so fierce now, and customers have increasingly high requirements for quality. The key link of gluing cannot afford to fail again. The two-component gluing machine has proven with practical results that gluing does not rely on luck, but on equipment to win steadily. Whether you are making regular insulated glass or high-end orders with irregular or large-sized shapes, it can easily hold and ensure that the sealing of each piece of glass is impeccable.

　　想亲眼看看它怎么给中空玻璃精准打胶？看看厂家的实拍视频就知道，胶线均匀、拐角顺滑、定位精准，每一步都让人惊艳。如果你的玻璃厂还在被打胶翻车的问题困扰，不妨试试这台双组份打胶机，让打胶环节从“烦心事”变成“放心事”！

　　Want to see with your own eyes how it accurately glues insulating glass? You can tell from the manufacturer's live action videos that the glue line is even, the corners are smooth, and the positioning is precise, every step is stunning. If your glass factory is still troubled by the problem of glue tipping over, you may want to try this two-component glue gluing machine, which can turn the gluing process from a "troublesome matter" to a "reassuring matter"!

　　本文由 双组份打胶机   友情奉献.更多有关的知识请点击  http://www.jyslpg.com/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from a two-component glue machine For more related knowledge, please click http://www.jyslpg.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.