丁基胶涂布机常见问题的解决方法： 1.铝框上出现一边或两边都不沾胶的现象时我们应检查胶缸、胶头的温度是否正常，压力是否在我们设定的范围之内，检查两胶头的距离是否过大（此距离设定至铝条刚刚能从两个打胶头之间过去为好）。

　　Solution to common problems with butyl rubber coating machine: 1. When there is no glue on one or both sides of the aluminum frame, we should check whether the temperature of the glue cylinder and glue head is normal, whether the pressure is within the range we set, and whether the distance between the two glue heads is too large (this distance should be set until the aluminum strip can just pass between the two glue heads).

　　如果上述情况都没有问题，可断定两个打胶头（或一个），由于丁基胶中有杂质而堵住了胶头出胶的眼，这就需要卸下打胶头，用煤油浸泡，然后将胶头内的胶全部清理干净后再装上即可。

　　If the above situations are not a problem, it can be concluded that two or one of the glue heads have blocked the glue outlet due to impurities in the butyl rubber. This requires removing the glue head, soaking it in kerosene, and then cleaning all the glue inside the glue head before reinstalling it.

　　2.该设备全部采用液压系统，油缸及液压系统全部采用高压油管连接，每个连接处都由组合垫密封，若发现漏油，及时更换组合垫。

　　2. The equipment adopts a hydraulic system, and the oil cylinder and hydraulic system are all connected by high-pressure oil pipes. Each connection is sealed with a combination gasket. If oil leakage is found, the combination gasket should be replaced in a timely manner.

　　3.该设备的胶头加热和胶缸加热，由加热棒两个和加热盘一个提供，由温控表来设定和调整温度的高低，若发现温度升不高或升高后往下降，请检查加热棒或加热盘是否损坏，并检查温控表是否正常

　　3. The heating of the rubber head and the heating of the rubber cylinder of the device are provided by two heating rods and one heating plate. The temperature is set and adjusted by a temperature control meter. If the temperature does not rise or rises and then falls, please check whether the heating rod or heating plate is damaged and whether the temperature control meter is normal

　　新型免卸压，手动调节胶嘴距离丁基胶涂布机

　　New type of pressure free, manually adjustable nozzle distance butyl rubber coating machine

　　中空玻璃铝条丁基胶涂布机免泄压力免松螺丝，直接调整胶嘴间隙免泄压丁基胶涂布机，免泄压丁基胶打胶机，中空铝隔条丁基胶机设备，中空玻璃铝条丁基胶涂布机免泄压力免松螺丝，直接调整胶嘴间隙省去了繁琐的胶头调整间隙的时间，避免了操作不熟练所产生的漏胶等故障问题。

　　Hollow glass aluminum strip butyl rubber coating machine without pressure relief or loosening screws, directly adjusting the gap between the rubber nozzle without pressure relief butyl rubber coating machine, non pressure relief butyl rubber gluing machine, hollow aluminum spacer butyl rubber machine equipment, hollow glass aluminum strip butyl rubber coating machine without pressure relief or loosening screws, directly adjusting the gap between the rubber nozzle saves the time of adjusting the gap of the rubber head, avoiding problems such as glue leakage caused by unskilled operation.

　　免泄压丁基胶涂布机是现在的中空玻璃设备当中先进的打胶设备，还有就是双组份打胶机是打密封胶的，也是先进的，具备纯气动，可推拉带万向轮的。

　　The pressure relief free butyl rubber coating machine is an advanced gluing equipment among the current insulated glass equipment. The two-component gluing machine is also advanced for gluing sealant, with pure pneumatic and push-pull universal wheels.

　　该机有plc机控制，人机界面操作，自动准确完成涂胶动作，并有多速段调节，生产效率高。

　　This machine is controlled by a PLC machine, operated by a human-machine interface, automatically and accurately completes the gluing action, and has multi speed adjustment, resulting in high production efficiency.

　　采用不锈钢工作台面，并加装定位装置，该机适用于仿形，长方形，圆形各种不同规格的铝间隔框。

　　The machine adopts a stainless steel worktable and is equipped with a positioning device. It is suitable for aluminum spacer frames of various specifications, including imitation, rectangular, and circular.

　　耐高温密封设计，解决了涂布机普遍存在的漏胶难题。

　　High temperature resistant sealing design solves the common problem of glue leakage in coating machines.

　　该机分液压系统和气液系统增压工作。

　　The machine is divided into hydraulic system and gas-liquid system for boosting work.

　　此款丁基胶涂布机省去了之前泄压力的麻烦，操作简单，实用方便。

　　This butyl rubber coating machine eliminates the trouble of pressure relief before, with simple operation and practical convenience.

　　丁基胶涂布机(丁基胶涂胶机)是在铝间隔框两侧均匀涂丁基胶的专用设备, 操作人员只需手扶铝间隔框, 其它动作均由设定程序自动完成,

　　The butyl rubber coating machine (butyl rubber coating machine) is a specialized equipment that evenly applies butyl rubber on both sides of the aluminum spacer frame. The operator only needs to hold the aluminum spacer frame with their hand, and other actions are automatically completed by the set program,

　　丁基胶涂布机(丁基胶涂胶机)采用人机界面, 操作方便, 涂胶效果好, 生产效率高, 是中空玻璃生产中必不可少的设备.

　　The butyl rubber coating machine adopts a human-machine interface, which is easy to operate, has good coating effect, and high production efficiency. It is an essential equipment in the production of insulating glass

　　【丁基胶涂布机(丁基胶打胶机)技术参数】

　　Technical parameters of butyl rubber coating machine (butyl rubber gluing machine)

　　工作气压：0.5-0.8MPa

　　Working pressure: 0.5-0.8MPa

　　输入电源：380V / 220V

　　Input power supply: 380V/220V

　　50HZ

　　50HZ

　　输入功率：4.2KW

　　Input power: 4.2KW

　　输出速度：14m/min

　　Output speed: 14m/min

　　打胶温度：110℃-150℃

　　Glue temperature: 110 ℃ -150 ℃

　　挤胶压力：12-15MPa

　　Squeezing pressure: 12-15MPa

　　胶头可调范围：14-23mm

　　Adjustable range of adhesive head: 14-23mm

　　外形尺寸：3000×700×1200mm

　　Dimensions: 3000 × 700 × 1200mm

　　重量（约）：800Kg

　　Weight (approximately): 800Kg

　　新型免卸压丁基胶涂布机_丁基胶打胶机_中空玻璃打胶_卧式丁基胶涂布机

　　New type of pressure free butyl rubber coating machine, butyl rubber gluing machine, hollow glass gluing machine, horizontal butyl rubber coating machine

　　本文由  卧式丁基胶涂布机  友情奉献.更多有关的知识请点击  http://www.jncsjx.com/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from the horizontal butyl rubber coating machine For more related knowledge, please click http://www.jncsjx.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.