双组份打胶机的基本工作流程如下：

　　The basic working process of two component rubber press is as follows:

　　(1)在打胶机的控制面板设定个好打胶机的打胶速度(默认也可以)

　　(1) first, glue the speed of the glue machine in the control panel of the glue machine (the default can also be)

　　(2)将玻璃放入打胶机的工作区域

　　(2) put the glass into the working area of the glue machine

　　(3)当设备检测到玻璃后吸盘会自动吸住玻璃以免玻璃在打胶过程中晃动或人为晃动正在进行打胶的玻璃

　　(3) when the device detects the glass sucker automatically so as not to suck the glass glass glue in the process of shaking in the shaking is glue or man-made glass

　　(4)当洗盘对玻璃固定好后，打胶机的机头就开始对玻璃进行打胶动作(不需要进行对玻璃的厚度以及宽度进行设置，打胶机会自动调整并工作)

　　(4) when fixed on the glass pad, head of glue machine began to glass glue (without the need for action on the glass thickness and width setting, glue the opportunity to automatically adjust and work)

　　(5)以上的步骤重复3次将玻璃的4边全部完成打胶后整个玻璃的打胶工作就算完成了。

　　(5) the above steps are repeated 3 times, all the 4 sides of the glass are finished, and the gluing work of the whole glass is finished.

　　一般在默认的打胶速度每分钟至少可以完成一款2米5见方的玻璃打胶工作，如果将打胶机的打胶速度加快生产会进一步提高。

　　In general, the default glue speed per minute can be completed at least a 2 square meter 5 glass glue, if the glue machine glue speed will further improve the production efficiency.

　　以上便是双组份打胶机今天的分享，您还满意吗，欢迎关注我们的网站:http://linshi.jncsjx.com并且关注我们的产品，我们将为您提供优良的产品，衷心的愿与您建立合作关系。

　　The above is to share the two-component glue machine today, you still satisfied with it, welcome to our website: http://linshi.jncsjx.com and pay attention to our products, we will provide you with excellent products, sincerely wish to establish business relationship with you.