
清洗双组份打胶机针阀的前提
时间:2017-11-06 来源:http://www.jncsjx.com/ 发布人:昌盛机械
1、双组份打胶机Y型过滤器的清洗:其位置在辅料泵出口处,清洗时将端盖拧下,用煤油浸泡,用牙刷类刷子刷干净。安装时将网放在端盖里用手拧到底,再用扳手拧紧。用一组胶洗一次,如无杂质两组胶洗一次,灵活掌握。
1, glue machine Y type filter cleaning: its location in the auxiliary pump outlet, wash the end cover will be screwed, soaked with kerosene, brush with a brush clean. The installation will be placed on the end cover by hand net screwed in the end wrench, tighten. Use a set of glue to wash once, such as no impurities, two groups of rubber wash once, flexible grasp.
2、打胶机的清洗保养:通常所说的玻璃打胶机清洗工作是针对打胶作业后残留在打胶机设备中各部位胶料的清除清洗。这里所指的并非每天的排胶清洗,而是生产任务完成后对打胶机过滤器、混合器及针阀、胶枪的清洗工作。
2, glue machine cleaning and maintenance: usually called glass glue machine cleaning work is aimed at glue after the operation in the glue machine equipment in all parts of the cleaning and cleaning. It is not the daily glue cleaning, but the cleaning of the filter, mixer, needle valve and glue gun after the completion of the production task.
3、打胶机针阀的清洗:清洗时将其拧下,用尖嘴钳拧下小螺母,拔出针体,弹簧。全部清洗干净。针阀出口平面及针帽确保无任何杂质,划伤,变形。安装时将针插入阀体,弹簧套在针体上,螺母大头向里面拧紧,力量在1到2公斤左右。

3, cleaning glue machine needle cleaning: unscrew the nut with a small clamp screw, pull out the needle body, spring. Clean all. Needle valve outlet plane and needle cap ensure no impurities, scratches, deformation. When installing, insert the needle into the valve body, the spring is sheathed on the needle body, the nut is screwed to the inside, and the power is about 1 to 2 kilograms.
4打胶机胶枪的清洗:枪口混合器清洗时直接拧下枪口混合器取出混合芯即可。清洗枪柄混合器时,先把枪上的定位螺丝松开,然后拧下枪柄混合器。枪口混合器同混合器同周期清洗;抢柄混合器同枪同周期清洗,半年或一年洗一次。
4 glue machine glue gun cleaning: muzzle mixer cleaning, directly unscrew the muzzle mixer, take out the mixing core. When the first mixer cleaning grips, positioning screws loose on the gun, then unscrew the grips mixer. The muzzle mixer is cleaned with the same period of the mixer; the grab mixer is cleaned with the same period of the gun, and washed once or half a year.
本文由双组份打胶机为您提供,我们的网站是:http://linshi.jncsjx.com我们将以全心全意的热情为您提供更优质的服务,欢迎您的访问!
In this paper, a two component glue machine to provide you, our website is: http://linshi.jncsjx.com, we will wholeheartedly provide you with better service, you are welcome to visit!
- 中空玻璃加工设备升级,4大核心革新,解决清洗刮伤、干燥不彻底8大痛点 2026/04/08
- 中空玻璃生产线避坑!传送带3大核心优势,零划痕+高平稳,产能提升35%不返工 2026/04/07
- 中空玻璃生产线:清洗段全面升级,娇贵玻璃清洗接近零损伤 2026/04/06
- 中空玻璃加工设备革新:一体钣金框架告别焊接,稳到零偏差,次品率直降 2026/03/27
- 丁基胶涂布机:中空玻璃氩气锁鲜关键!实测底部99.9%,边缘95.6%全达标 2026/03/26
- 山东玻璃厂必看!大小片中空玻璃全自动封胶线,告别残胶返工,打胶零瑕疵 2026/03/26
- 昌盛中空玻璃生产线:充气超93%+出口俄罗斯,大玻璃稳、封胶严,老客户转介绍不断 2026/03/25
- 双组份打胶机:中空玻璃省工利器,全自动密封成型,告别人工短板 2026/03/25
- 全自动封胶线:三项智能节能黑科技,玻璃厂年省电费超30% 2026/03/24
- 45米全自动中空线:玻璃深加工厂的核心引擎,高效定制一步到位 2026/03/24

当前位置:



产品分类Product categories
联系我们Contact us
