近年来，我国的科技发展突发猛进，尤其是沿海一带，为了迎合工业自动化生产的的需求，自动打胶机设备被广泛运用于更广泛的领域，如:半导体、电子元器件等!碰巧这些领域对自动打胶机的生产工艺要求很高，那么如何才能保证自动打胶机的点胶精度呢?
In recent years, China's scientific and technological development has made a sudden and rapid progress, especially in the coastal areas. In order to meet the needs of industrial automation production, automatic gluing machine equipment has been widely used in a wider range of fields, such as: semiconductors, electronic components, etc! It happens that these fields have high requirements for the production process of automatic glue dispenser, so how can we ensure the dispensing accuracy of automatic glue dispenser?
1、自动打胶机用量的设定
1. Setting of the dosage of automatic glue applicator
一般来说，自动打胶机的尺寸应该是产品间距的一半，这样可以保证组件有足够的胶水进行粘接，不会有多余的胶水溢出，让自动打胶机的点胶速度更快更准确!
Generally speaking, the size of the automatic glue applicator should be half of the product spacing, so as to ensure that the components have enough glue for bonding, and there will be no excess glue overflow, so that the dispensing speed of the automatic glue applicator is faster and more accurate!
2、自动上胶机点胶压力设定
2. Dispensing pressure setting of automatic gluing machine
自动上胶机点胶压力的设定是非常重要的。如果自动打胶机的压力过高，胶水就会溢出。如果压力过低，就会出现泄漏或断续点胶。因此无法达到产品所要求的点胶工艺，导致产品合格率低，工作效率低!
The setting of the dispensing pressure of the automatic gluing machine is very important. If the pressure of the automatic glue applicator is too high, the glue will overflow. If the pressure is too low, there will be leakage or intermittent dispensing. Therefore, the dispensing process required by the product cannot be achieved, resulting in low product qualification rate and low work efficiency!

3、自动点胶机点胶针的选择
3. Selection of dispensing needle of automatic dispensing machine
自动打胶机的针的选择应根据产品的大小和胶点的直径来确定。一般来说，自动打胶机点胶针的大小应该是胶点大小的一半。自动打胶机的针太大会造成胶水溢出，影响点胶精度!
The needle selection of the automatic glue applicator should be determined according to the size of the product and the diameter of the glue point. Generally speaking, the size of the dispensing needle of the automatic glue applicator should be half the size of the glue dot. The needle of the automatic glue applicator is too large to cause glue overflow and affect the dispensing accuracy!
4、自动上胶机针与工作面间隔设定
4. Automatic gluing machine needle and working surface interval setting
不同的自动点胶机所使用的点胶针也不同。有些针头有一定程度的停止，而有些针头没有。因此，掌握针与工作面之间的点胶间隔十分重要。点胶前，针与工作面之间的间隔应进行校准。
Different automatic dispensing machines use different dispensing needles. Some needles stop to some extent, while some needles do not. Therefore, it is very important to master the dispensing interval between the needle and the working face. Before dispensing, the interval between the needle and the working surface should be calibrated.
5、自动打胶机胶水粘度的选择
5. Selection of glue viscosity of automatic glue applicator
自动打胶机的胶水粘度大，胶点小，容易导致拉丝。自动打胶机黏度小，胶点大，可能导致透胶现象。因此，选择合适的胶水粘度的自动打胶机是非常重要的!
The glue viscosity of the automatic glue applicator is large and the glue point is small, which is easy to lead to wire drawing. The automatic glue applicator has small viscosity and large glue point, which may lead to glue penetration. Therefore, it is very important to select an automatic glue applicator with proper glue viscosity!