双组份打胶机发生报警的响声是怎么回事?

发布时间:2020/09/18    发布人:

双组份打胶机在使用过程中也会出现一些非常简单的问题,比如报警是怎么回事?往往很简单是事情,让不明白的您措手不及,下面我们给大家讲一下出现的原因以及解决办法,让您万一出现问题的时候能以及的检修,开始工作。
There are some very simple problems in the use of the two-component gluing machine, such as what is the alarm? Often very simple things, let you do not understand by surprise, we will tell you the causes and solutions, so that you can repair and start work in case of problems.
第一种情况:就应该是管路堵了,胶压力超高报警,看看胶压力有没有超高,超高的话清洗管路。
The first situation: it should be the pipeline is blocked and the glue pressure is too high to alarm. If the glue pressure is too high, clean the pipeline.

 


第二种情况 双组份打胶机看看是不是伺服电机报警,看看配电柜里的伺服控制器有没有报警的。
In the second case, the two-component gluing machine is to see whether the servo motor alarms, and whether the servo controller in the power distribution cabinet has an alarm.
双组份打胶机故障分析:
Failure analysis of two-component gluing machine:
1机头前进定位螺栓松动。解决方法:调节好并固定好。
1 head forward positioning bolt loose. Solution: adjust and fix.
2 玻璃定位松动,使其失去作用。解决方法:调定好定位。
2. The glass positioning is loose, making it ineffective. Solution: adjust the positioning.
3 活动量太大或吸盘的真空发生器损坏。解决方法:维修。
3. The activity is too large or the vacuum generator of suction cup is damaged. Solution: repair.
4前移气缸的前进力量太大。解决方法:调节前进速度。
The forward force of the forward moving cylinder is too large. Solution: adjust the forward speed.
如果您是购买的我们的产品,可以联系我们的业务人员或者售后,我们给您提供电话解决和上门服务,让您一次购买设备,终身无忧。
If you are purchasing our products, you can contact our business personnel or after-sales service. We will provide you with telephone solution and on-site service, so that you can purchase the equipment at one time, without worry for life.