Hollow glass glue machine is divided into two parts, single part glue machine, and Ding glue machine. Different glue machines are used differently. Let's explain.
In the future, the application machine of insulating glass and insulating glass glue will be affected by the sealing or structural integrity of insulating glass glue behind the glass, but in the process of daily use, we have to admit that insulating glass is indeed a good building material, with good sealing and sound insulation and external stress performance.
Hollow glass glue machine is a kind of glue that is often used by professionals. However, with the selection of glue, we often see a silicone rubber, glass glue, silica gel, etc. in daily use, we usually use glue machine to directly inject glue into two different materials in the cylinder. After using a certain proportion, we need to match, mix and quantify through quantitative pump, The hollow glass glue machine is used to inject into the product, but because the general hollow glass sealant machine glue uses some very large glue viscosity, the operation requirements are very high, which is very difficult, so the operation of the hollow glass sealant machine is different from that of the general glue machine. When the hollow glass glue machine works, it is mainly based on the operation specifications of the glue bucket provided by the customer, and the customized pressure plate, etc, Through the pressure plate glue, the pressure plate is equipped with piston pump and gear pump, all of which are only needed to put the plastic barrel in the pressure plate machine when preparing the glue customer for use.
Hollow glass glue machine can be divided into single component hollow glass glue machine and hollow glass two-component glue machine according to the performance of glue. Single rent one glue machine. This glue machine is a kind of simple equipment. The use process is relatively simple. Only one pressure plate is needed to take out a component glue and then put it into the product.
The other is a two-component glue machine. As we know, it is almost a two-liquid dispensing machine. When it works, it can be customized according to the customer's requirements. The pressure plate and the pressure plate need two. Then, under the two customized rubber cylinder pressure plates, prepare and mix the pressure glue ratio of the rear pressure plate and the quantitative pump for mixing. All finished internal glue products will be in the future.
At present, more and more pistons in the market are in a mood, because the language is that the piston glue has a professional process of smoke rubber, but also often because the operation is not accurate in the hollow glass glue machine, glue line becomes uneven, easy to appear or large or small, so after the development and research, the hollow glass can continuously glue machine, with a lot of precision and operation, And glue water line also becomes more even, which will not be matched in large and small events, and according to the ratio of use time to match the use situation. Besides the operation of hand-held glue gun, you can also use manual operation.
The above is a detailed introduction of the use characteristics of the two-component glue applicator for the hollow glass glue applicator. To learn more, please click http://www.jncsjx.com