双组份打胶机的结构原理及应用

发布时间:2020/06/20    发布人:

双组份打胶机:原理跟双液点胶机相同,依据客户AB胶桶量身订制两个压盘,把胶桶放入压盘下,经过压盘压胶再经过定量泵配比、混合、定量打到产品上。现在市道的中空玻璃打胶机大多数为活塞式打胶,因为活塞式有一个抽胶的进程,经常会导致打胶的线条忽大忽小,所以我司的中空玻璃双组份打胶机都是以可连续性供胶的精密齿轮泵抽胶,这样可确保打胶线条均匀,不会有忽大忽小的状况呈现。
Two component gluing machine: the principle is the same as that of the double liquid dispensing machine. Two pressure plates are customized according to the customer's AB glue barrel. Put the glue barrel under the pressure plate, press the glue through the pressure plate, and then mix, mix and quantitatively hit the product through the quantitative pump. At present, most of the hollow glass dispensers in Shidao are piston type. Because the piston type has a process of drawing glue, which often causes the glue line to fluctuate from big to small. Therefore, our hollow glass two-component dispensers are all pumping glue with precision gear pumps that can continuously supply glue, which can ensure that the glue line is even and will not fluctuate from big to small.


双组份打胶机依据自动化程度可分为:半自动打胶机及全自动打胶机。
According to the degree of automation, the two-component gluing machine can be divided into: semi-automatic gluing machine and full-automatic gluing machine.
半自动中空玻璃打胶机:半自动打胶机仅仅把胶水配比、混合、定量打胶的设备,再配备手持式打胶枪,因为中空玻璃标准都较大,需人手移动打胶枪把胶水打到中空玻璃上。
Semi automatic hollow glass gluing machine: the semi-automatic gluing machine is only equipped with glue proportioning, mixing and quantitative gluing equipment, and a hand-held gluing gun. Because the standards of hollow glass are large, it is necessary to move the gluing gun manually to hit the glue on the hollow glass.
全自动中空玻璃打胶机:全自动中空玻璃打胶机配备三轴机械手,三轴机械手跟打胶机一致通讯,相互配合,打胶机把胶水配比、混合后定量供到三轴机械手,三轴机械手可完成半圆、圆形、半圆弧、四方形、三角形等各种不规则形状打胶作业。行程依据客户玻璃最大尺度定制。
Full automatic hollow glass gluing machine: the full-automatic hollow glass gluing machine is equipped with three-axis manipulator. The three-axis manipulator communicates with the gluing machine and cooperates with each other. The gluing machine supplies the glue proportion and mixing to the three-axis manipulator quantitatively. The three-axis manipulator can complete all kinds of irregular shape gluing operations such as semicircle, circle, semicircle, square, triangle, etc. The itinerary is customized according to the largest scale of customer's glass.
中空玻璃双组份打胶机特色:
Features of hollow glass two-component gluing machine:
1.配比精准、定量准确不会呈现打胶线条忽大忽小的状况
1. Accurate ratio and quantitative accuracy will not show the situation that the gluing line is big or small
2.经过进口高精度齿轮泵抽胶,安稳性高运用寿数长。
2. After imported high-precision gear pump, it has high stability and long service life.
3.加装限位报警功用,压盘压到桶底后,设备发出声光报警提示工作人员更换胶桶。
3. The limit alarm function is added. After the pressure plate is pressed to the bottom of the barrel, the equipment will give an audible and visual alarm to remind the staff to replace the rubber barrel.
4.出胶巨细可依据实际状况自由调理。
4. The size of the glue can be adjusted freely according to the actual situation.
三轴机部分特色:
Features of triaxial machine:
1.运用专业工控电脑配合进口伺服电机,运转安稳,精确。
1. Use professional industrial control computer with imported servo motor to ensure stable and accurate operation.
2.教训式编程,编程方便快捷。
2. Lesson based programming is convenient and fast.
3.存储容量:2500点以上编程点。
3. Storage capacity: more than 2500 programming points.
4.可选配滚珠渠道或流水线作业功用,使出产功率更高效。
4. Ball channel or assembly line operation function can be selected to make the output power more efficient.
适用胶水:硅酮胶、高粘度硅胶、玻璃胶等高粘度胶水流体控制作业。
Applicable glue: silicone glue, high viscosity silica gel, glass glue and other high viscosity glue fluid control operation.