The main components of the two-component gluing machine are gluing bar, stainless steel, durable, and the gluing effect is very good. Generally, the domestic CNC technology cannot reach the level, but for the maintenance and cleaning problems, the following is about how to clean the gluing bar.
1. How to configure the plastic mixing rod on the two-component gluing machine
The two components of organic silica gel solidified by the hollow glass glue machine can only be fired. You can choose the plastic glue stick, and directly put the glue stick into a new, scum outer tube. This way, the efficiency is high. The plastic glue stick only costs a few yuan, saving efficiency, and the cost is not very high.
Second, if you have a two-component dispenser, it's a stainless steel dispenser
Size of stainless steel agitator for two component sizing machine:
1 12.5 * 128 (Changyi and manual gluing machine, semi-automatic gluing machine, high wear-resistant nylon and stainless steel)
尺寸2:20 * 138(长益自动上胶机，尼龙高耐磨性)
Size 2: 20 * 138 (Changyi automatic sizing machine, nylon high wear resistance)
No.3 11.7 * 204(长益河、汉江、济南设备)(重庆长江等半自动胶机设备)
No.3 11.7 * 204 (Changyi River, Hanjiang River, Jinan equipment) (Chongqing Yangtze River and other semi-automatic rubber machine equipment)
4号11.7 * 245(适用于明日之星、蓝天新海、韩江等自动上胶机)
No. 4 11.7 * 245 (applicable to the automatic gluing machine of tomorrow star, Lantian Xinhai, Hanjiang, etc.)
No matter what kind of mixing stick we configure, more importantly, the use of equipment and machines, good equipment can let you have no back. The above is a detailed introduction to how to clean the upper glue stick part of the two-component gluing machine. To learn more, please click the official website http://www.jncsjx.com